{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling XDLW 070308 ER, for FeedKing HPC indexable face mills, HB7720
Article no.: 212932 HART
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | XDLW 070308 ER | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Insert width | 8 mm | |
| Blade thickness | 3.18 mm | |
| Insert length | 7.24 mm | |
| Insert version | right-hand | |
| Cutting edge length | 7.24 mm | |
| Cutting edge height | 3.18 mm | |
| Insert diameter | 8 mm | |
| Corner radius | 0.8 mm | |
| Corner chamfer length | 1.53 mm | |
| Corner chamfer angle | 8.5 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| ISO-Code | XDLW 070308 ER | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Tool application group | HPC | |
| Cutting media, manufacturer’s designation | HB7720 | |
| Coating | PVD | |
| Grade | HB7720 | |
| Insert thickness | 3.18 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | XDLW 070308 ER | |
| Interface coding for insert according to ISO TS 13399-60 | XD0703083R | |
| Insert designation | XDLW 070308 ER | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); non-ferrous materials (N); stainless steel (M); steel (P) | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Machining strategy | HPC | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Cutting conditions | continuous | |
| Number of potential uses | 4 pcs. | |
| Weight | 2 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 212932 HART | |
| EAN / GTIN | 4045197581563 | |
| Manufacturer number | 212932 HART | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
H
100
H
80
H
50
Description
Note:
Standard application values for ae = 0.5 … 1×D / ap max