{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling BDMT 070304 ER-JT, for indexable milling cutters, PR1810
Article no.: 227159 GG
Article code:
Product details
Technical Data
| Machining method | shoulder milling (FEC) | |
| Number of teeth | 2 pcs. | |
| ISO-Code | BDMT 070304 ER-JT | |
| Tool material | Carbide | |
| Corner radius R | 0.4 mm | |
| Insert thickness T | 2.6 mm | |
| Tolerance Class | M | |
| Coating | PVD | |
| Suitable for material | cast iron (K) | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth, Side milling | 4 mm | |
| Max. cutting depth, Full slot milling | 2 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | BDMT 070304 ER-JT | |
| Base form | rhomboidal | |
| Thickness of insert S | 3.18 mm | |
| Insert version | right-hand | |
| Corner angle | 82 degrees | |
| Setting angle | 90 degrees | |
| Attachment hole diameter | 2.3 mm | |
| Cutting depth ap, min. | 0.1 mm | |
| Cutting depth ap, max. | 6 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.09 mm | |
| Feed rate per tooth max. fz | 0.16 mm | |
| Machining group, manufacturer-specific | GG | |
| Machining group | K (cast iron) | |
| Cutting media, manufacturer’s designation | PR1810 | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | BDMT0703 | |
| Insert designation | BDMT070304 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Direction of action | right-hand | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Number of potential uses | 2 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 227159 GG | |
| EAN / GTIN | 4960664026463 | |
| Manufacturer number | TLS00038 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
K
180
Description
Note:
Standard application values for ae = 0.3×D. Exactly 90° up to ap = 4 mm.