Version:
- 6 bar compressed air connection required to unlock.
- Radial compensation 0.1 mm.
- Maximum pin retraction 1 mm.
- Repetition accuracy < 2.5 μm.
- All components made of stainless or corrosion-resistant steel.
Advantage:
- Repetition accuracy < 2.5 μm.
- Clearance is always zero thanks to HSK principle. (hollow shank taper)
- Thermal symmetry through pre-loaded machine tapers. These equalise pitch inaccuracies towards zero point.
- Only one type of clamping stud is required, which simplifies logistics.
- 30% greater force/stroke volume than standard clamping pots. Clamping jaws motion is linear and does not need to be divided into rapid stroke and clamping stroke.
- Blow-out function, turbo function and jaw position query.
- No free pins or locating pins required, but still works the classic way with these types of pins.
Function:
A piston with recesses in the piston valve area that includes attachments arranged at an angle of 15° which engage in the valves.
Piston stroke motion moves the clamping jaws radially, locking the clamping stud by applying the spring force of the 14 locking springs.
Application:
For individual incorporation in the clamping system. For retrofitting on existing base plates for greater holding force.
Optional extras:
Clamping stud No.
360025 size 16M8, 16M10, 18M12, 18M16 and 25M10.