Version:
Description:
With this backing pad, COMBICLICK tools can be used on commercially available angle grinders. The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system at the back of the tool. The unique geometry of the cooling slots ensures high air throughput, which in turn considerably reduces the thermal load on the abrasive material and the workpiece. Compared with conventional tools, the quick-mounting system, robust holder, secure tool-locking feature and integrated cooling system together achieve a workpiece temperature that is 30 % lower, a 25 % higher stock removal rate, a 30 % longer tool life, and better utilization of the abrasive material. Hardness CC-GT (medium) = black
Feature:
- PFERD type: CC-GT 125
- RPM, max.: 12200 RPM
- Suitable for dia. metric: 125
- Suitable for: Angle grinders 125, spindle 5/8″
- Version: medium
- Dia. external, metric: 125 mm
- Dia. thread: 5/8
Advantage:
- The geometry of the cooling slots significantly reduces the thermal load.
- High economic efficiency due to minimal tool change times.
- The innovative quick-mounting system ensures convenient handling and rapid tool changing.
Application:
Recommendations for use: Type CC-H-GT is mainly used to work on stainless steel (INOX). It has a very high edge strength, which enables a higher contact pressure.
Drive types: Angle grinder; Cordless angle grinder
Material:
Significantly reduced thermal load due to the geometry of the cooling slots.
Highly economical due to minimal tool change times.
Suitable for:
For machining stainless steel (INOX), preferably use the CC-H-GT version. This has a very high edge strength in order to realise higher contact forces.
Attention:
The maximum permissible circumferential speed is 80 m/s.
When using backing pads with a diameter of 180 mm, make sure that the contact pressure is not too high in order to prevent overstretching of the backing pad.
Note:
- The maximum permitted peripheral speed is 80 m/s.
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.