Description:
PFERD has further developed the ALU cut especially for stock removal on aluminium. This cut is characterized by its high stock removal rate. Ball-shaped burr according to DIN 8032.
Feature:
- RPM from, hard non-ferrous metals: 32000 RPM
- RPM from, soft non-ferrous metals: 32000 RPM
- RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 32000 RPM
- RPM to, hard non-ferrous metals: 59000 RPM
- RPM to, soft non-ferrous metals: 59000 RPM
- RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP): 59000 RPM
- Cut: ALU
- Dia. external, metric: 6 mm
- Dia. shank, metric: 3 mm
- Length, cut: 5 mm
- Length, total: 35 mm
Advantage:
- Extremely high stock removal rate.
- Large chips.
- Reduced material adhesion.
- Long tool life and smooth running.
- Can be used with cutting speeds of up to 1,100 m/min.
Application:
- Recommendations for use: To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible. Observe the recommended rotational speeds. To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.
- Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams
- Drive types: Flexible shaft drive; Tool machine; Robot; Stationary machines; Straight grinder
Material:
- Materials that can be worked:
- Aluminium
- Brass
- Bronze
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Hard aluminium alloys
- Hard non-ferrous metal
- Plastics
- Soft aluminium alloys
- Soft non-ferrous metal
- Thermoplastics
- Tough aluminium alloys
- Zinc
- Materials that can be worked: Aluminium; Brass; Bronze; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hard aluminium alloys; Hard non-ferrous metal; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Thermoplastics; Tough aluminium alloys; Zinc
Note:
Please add the desired toothing to the designation.