Version:
Description:
Cloth rings are used for pre-polishing and high-gloss polishing with polishing pastes. If the intention is to achieve very smooth surface finishes, use several or even all variants successively. ST (sisal cloth) version for coarse pre-polishing.
Feature:
- RPM, max.: 3000 RPM
- RPM, optimum: 950 RPM
- Version: ST
- Width, metric: 10 mm
- Dia. hole: 20 mm
- Dia. external, metric: 200 mm
Advantage:
- Highly flexible, enabling optimal adjustment to the contour.
- Can be profiled as desired, meaning they can also be used for tools with complex geometries.
Application:
- Recommendations for use: Pre-polishing of steel and INOX: Cloth rings ST with polishing paste PP 1 VP STEELOX. Pre-polishing of aluminium and brass: Cloth rings ST with polishing paste PP 2 VP ALU. Pre-polishing of non-ferrous metals: Cloth rings ST with polishing paste PP 3 VP NON-FERROUS. Version ST cloth rings achieve their best performance at a recommended cutting speed of 10–15 m/s.
- Applications: Polishing
- Drive types: Flexible shaft drive; Straight grinder
Material:
- Materials that can be worked:
- Aluminium
- Brass
- Bronze
- Cast steel
- Cobalt-based alloys
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
- Nickel-based alloys (e.g. Inconell and Hastelloy)
- Stainless steel (INOX)
- Steel materials with a hardness > 54 HRC
- Steels up to 1,200 N/mm² (< 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
- Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys
Suitable for:
Pre-polishing of steel and INOX: Cloth rings ST or TH with polishing compound PP 1 VP STEELOX.
Pre-polishing of aluminium and brass: cloth rings ST or TH with polishing compound PP 2 VP ALU.
Pre-polishing of non-ferrous metals: Cloth rings ST or TH with polishing compound PP 3 VP NON-FERROUS.
High-gloss polishing of all metals: cloth rings TW or FL with polishing paste PP 4 HGP UNIVERSAL.
High-gloss polishing of plastics: Cloth rings TW or FL with polishing compound PP 5 HGP PLAST.
Cloth rings of the TW and FL design achieve their best performance at a recommended cutting speed of 5-15 m/s.
Cloth rings of the ST and TH design achieve their best performance at a recommended cutting speed of 10-15 m/s.
Supplied with:
- Please order arbor separately.
Note:
Please order tool holder separately.
TR 12510 ST version: 10 mm bore (25.4/6-edge, tool holder FR/VR 12/25.4).
Please add the desired version to the designation.