{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Service MANOSKOP torque wrench w.mount for insert tools No. 730 Fix Values only for in-lb 130-650Nm Inside square stitch size 22 x 28 mm L. 911mm
Article no.: 96503465
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Torque Wrench |
Identification numbers & Classifications
| Article number | 96503465 | |
| EAN / GTIN | 4018754269778 | |
| Manufacturer number | 96503465 | |
| L-Number | L60010 5920 |
Description
Description:
- For work in series production
- The control knob can be unscrewed after the tripping torque has been set - this prevents the target torque from being accidentally changed
- The supplied TORX® TAMPER-RESISTANT locking screw also protects against tampering. As well as the enclosed adhesive seals. No adjustment possible without breaking the seal
- triggering
- No reset to ″0″ is required, as the measuring element is only loaded during tightening
- Receptacle for interchangeable plug-in tools
- QuickRelease security interlock
- Quick, precise adjustment with QuickSelect quick adjustment
- Double stop signal
- Very easy to read dual scale with color distinction of N·m/ft·lb or ft·lb/in·lb
- Tighten to the left by turning the plug-in tools over
- Continued load after tripping or loads against the operating direction, e.g. when screws are stuck, do not affect the tripping mechanism, which is thus protected against damage
- 2-component handle with easy-to-use green soft zone (resistant to oils, greases, fuels, brake fluids and Skydrol)
- Calibration with the perfectControl® calibration device No. 7794 or the calibration device No. 7706. If necessary Recalibration without disassembly
- Certificate according to DIN EN ISO 6789-2:2017
- DBGM
- In the sturdy plastic box (size 80-100 in the steel box)
- Display deviation ± 3%
Feature:
- Fine scale division: 2,5 N·m
- Gr.: II/65
- Height mm (h): 25,6 mm
- Length [mm): 911 mm
- LF: 900 mm
- MA N-m: 130 N·m
- Measuring range ft-lb: 100-480 ft·lb
- Measuring range N-m: 130-650 N·m
- Nominal value N-m: 650 N·m
- Scale division [E1]: 50 N·m
- Scale division [E2]: 20 ft·lb
- SF: 55 mm
- Size hex. drive [inner square]: 22 x 28 mm
- Weight: 3490 g
- Weight with box: 7000 g
- Width mm (b): 30,6 mm