{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Universal Puller 2-arm pattern 200x150 mm
Article no.: 1307827
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Two-leg extractor |
Identification numbers & Classifications
| Article number | 1307827 | |
| EAN / GTIN | 4036976107111 | |
| Manufacturer number | 1307827 | |
| L-Number | L60160 5168 |
Description
Description:
- Strong drop forged pattern
- Due to the bending-moment reinforcement on its back face, the energy-saving design of the cross-beam means even stronger and safer pulling work
- Scale for uniform adjustment of the puller legs. Allows centred pulling, with optimised application of force, even when extremely high pulling forces are required
- The quick-action adjustment feature supports the energy-saving and fast operation
- Spindle with replaceable ball and tip point
- Upgradeable with hydraulic spindle (see table)
Feature:
- 1000 V insulated: no
- 3D data available: no
- Anti-slip device on spindle available: no
- Can be retrofitted with hydraulic spindle: yes
- Clamping bracket available: no
- Clamping width inner pull-off a2 (min.) [mm]: 110 mm
- Clamping width inside pull-off a2 (max.) [mm]: 260 mm
- Clamping width outer pull-off (max.) [mm]: 200 mm
- Design: 2-arm
- Hook base width at working face c1 [mm]: 30 mm
- Hook brake present: no
- Hook foot depth usable d2 [mm]: 18 mm
- Hook foot thickness at the point e1 [mm]: 3,5 mm
- Hook parallel displaceable: yes
- Hydraulic spindle available: no
- Hydraulic spindle optional: 1.06/HSP1
- Load on the entire puller (max.) [t]: 5 t
- Number of arms: 2
- Number of hooks: 2
- Pulling force (max.) [t]: 5
- Quick release lever available: yes
- REACH registration available: no
- Reversible arms available: yes
- Scale graduation available: x
- Screws included: no
- Spindle anti-slip device: no
- Spindle Mounting: G1/2″
- Spindle Surface coating: Nitrocarburised
- Spindle Thread length (usable) [mm]: 210 mm
- Spindle thread size: G1/2x210mm
- Spindle Thrust piece type: Ball & point
- Spindle tip exchangeable: yes
- Spindle Width across flats: 22 mm
- Usable clamping depth b [mm]: 150 mm
- Use/application: For pulling off drive pulleys, wheels, ball bearings etc.
- VDE certified: no
- Width across flats [mm: 22 mm