{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Centring vice, Width: 75mm
Réf.: 363300 75
Référence:
Détails du produit
Caractéristiques techniques
| Base body length | 130 mm | |
| Base body width | 75 mm | |
| Base body height | 46 mm | |
| Jaw width | 75 mm | |
| Interchangeable jaws | oui | |
| Clamping force selection | maximum clamping force | |
| Clamping force | 22 kN | |
| Maximum torque | 75 Nm | |
| With bore | yes | |
| Pitch | 52 | |
| Pivoting jaw | no | |
| Can be swivelled | no | |
| Version | mechanical | |
| With swivel base | no | |
| Weight | 2.8 kg | |
| Material | steel | |
| Surface | plasma nitrided; precision milled | |
| Type of product | machine vice |
Identification et classification
| Référence article | 363300 75 | |
| EAN / GTIN | 4067263950677 | |
| Réf. fabricant | 363300 75 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Very good accessibility and perfectly symmetrical.
- Fully plasma-nitrided and precision milled on the underside.
- Clamps raw materials and finished parts with the least possible backstroke of the jaws / component.
- The clamping range can be changed by reversing the jaws.
- With interface for automated applications.
- Including holes for LANG positioning system, can be adapted to GARANT ZeroClamp and Erowa ITS148 (only No. 363300 75) via intermediate plate.
Application:
Perfect for 5-face machining. Centred clamping.
Suitable for:
Supplied with:
Base body, spindle, spindle nuts.
Optional extras:
Torque wrench No. 656050, socket No. 642229 12 (for size 75), No. 642229 13 (for size 120) clamping claws No. 363081 80 and 361165 CS1, GARANT clamping stud No. 363190, adapter plates No. 363079, 363080, 363085 height extension base No. 363090 (in combination with No. 363079) assembly station No. 358595 52/96.
Note:
Suitable top jaws No. 363310 – 363324 are not included in the scope of supply. Clamping situation S2 arises by reversing the jaws.
Warning:
Intended use
Reasonably foreseeable misuse
Intended use
Reasonably foreseeable misuse
- Clamping device for mounting on a machine intended to perform milling operations.
- For clamping workpieces in the blank or partially machined state.
- Adaptation to workpiece geometry is possible through various designs and attachment jaws.
- Use only when correctly assembled and with safety devices and guards on the machine fully operational.
Reasonably foreseeable misuse
- Do not use the centring vice for turning work.
- Do not mount components not in accordance with the specification.
- Do not make any unauthorised modifications.
- Do not use in explosion hazard areas.
Intended use
- Clamping device for mounting on a machine intended to perform milling operations.
- For clamping workpieces in the blank or partially machined state.
- Adaptation to workpiece geometry is possible through various designs and attachment jaws.
- Use only when correctly assembled and with safety devices and guards on the machine fully operational.
Reasonably foreseeable misuse
- Do not use the centring vice for turning work.
- Do not mount components not in accordance with the specification.
- Do not make any unauthorised modifications.
- Do not use in explosion hazard areas.