{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Plaquette de fraisage ⌀ 16 mm, pour fraises à copier
Réf.: 212727 ALU
Référence:
Détails du produit
Caractéristiques techniques
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | HOG | |
| Wet maximum | suitable | |
| Manufacturer’s designation | Fräswendeplatte 16 mm | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | round | |
| Thickness of the insert S | 4 mm | |
| Length of cutting insert L | 16 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 16 mm | |
| Diameter of the cutting insert d | 16 mm | |
| Corner radius R | 3 mm | |
| Rake angle | 9 degrees | |
| ISO-Code | HOG-2126xx16 | |
| Tool material | Carbide | |
| Machining group, manufacturer-specific | HOG | |
| Machining group | N (non-ferrous metals) | |
| Cutting media, manufacturer’s designation | HU7810 | |
| Insert thickness T | 4 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Insert designation | HOG-2126xx16 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 1 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | Aluminium; non-ferrous materials (N) | |
| Tolerance Class | M | |
| Machining method | profile milling (FPR) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Chip breaker | yes | |
| Cutter version | chamfered and rounded (S) | |
| Number of potential uses | 1 pcs. | |
| Weight | 8.3 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification et classification
| Référence article | 212727 ALU | |
| EAN / GTIN | 4045197761651 | |
| Réf. fabricant | 212727 ALU | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Tableau d’application
N
1400
N
700
N
500
S
60
Description
Exécution:
- Précision de rayon, de concentricité et d'interchangeabilité: ±0,015 mm.
Valeurs indicatives d’utilisation détaillées, voir manuel d'usinage GARANT 110020.
Utilisation:
Plaquettes UGV à rayon d'angle. Pour réduction de l'effort de coupe et des vibrations.