{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Fraise à bout hémisphérique HSS-PM, TiAlN, ⌀ e8 DC: 7mm
Réf.: 194302 7
Référence:
Détails du produit
Caractéristiques techniques
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00601005 | |
| Holder shape | straight clamping flat, adjustable length, with feather key | |
| Holder version | metric | |
| Holder size, metric | 0060 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 6 mm | |
| Oil | suitable | |
| Shank type | HB | |
| Air | suitable only under restricted conditions | |
| Tool material | HSS-E-PM | |
| Cutting media, manufacturer’s designation | HSS-PM TIALN | |
| Coating | TiAlN | |
| Cutter diameter Dc | 7 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | e8 | |
| Cutting edge length Lc | 10 mm | |
| ISO milling cutter type | round profile mill | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters (peripheral side) Z | 2 | |
| Number of effective cutters (end face) Z | 2 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Corner / edge | 1 | |
| Corner version | as radius | |
| Corner radius R | 3.5 mm | |
| Radius R | 3.5 mm | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal, oblique and vertical | |
| Interface | joint 1 | |
| Gauge length A | 24 mm | |
| Weight | 10 g | |
| Cutting direction | left-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 4000-82 | |
| Colour ring | without | |
| Type of product | round profile mill | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth L2 | 10 mm; 0.21 mm |
Identification et classification
| Référence article | 194302 7 | |
| EAN / GTIN | 4045197110084 | |
| Réf. fabricant | 194302 7 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Tableau d’application
N
138
N
110
P
83
P
64
P
64
P
37
P
32
M
23
M
18
K
55
N
110
Description
Exécution:
Coupe au centre pour le fraisage en plongée.
Pour rendement optimal.
Pour rendement optimal.
Remarque(s):
Pour le fraisage de rainures semi-circulaires ou les fraisages avec rayon de raccordement.
Conviennent comme fraises à copier et pour la fabrication de moules.
fz pour ap 0,05×D.
Conviennent comme fraises à copier et pour la fabrication de moules.
fz pour ap 0,05×D.