{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Fraise à trépaner carbure brasé plat, ⌀ DC: 28mm
Réf.: 118500 28
Référence:
Détails du produit
Caractéristiques techniques
| Kølesmøremiddel | non | |
| Grænseflade, placering | på maskinsiden | |
| Holdertype | Queue cylindrique | |
| Holderform | surface de serrage droite | |
| Skaftdiameter | 10 mm | |
| Skaftudførelse | HB | |
| Skærediameter, min. | 28 mm | |
| Skærediameter, maks. | 28 mm | |
| Konfigurerbar | non | |
| Tolerance for skærediameter | tolérance fabricant | |
| Producenttolerance min. | -0,05 mm | |
| Producenttolerance maks. | 0,1 mm | |
| Spånnotlængde | 8 mm | |
| Produktnavn (type) | N | |
| Skæremateriale | Carbure | |
| Grænseflade | interface 1 | |
| Nyttelængde | 8 mm | |
| Skæreretning | coupe à droite | |
| Værktøjsdesign | porte-outils en acier avec plaquettes de coupe en matériau dur brasé suivant DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Standard | Werksnorm | |
| Farvering | sans | |
| Produkttype | fraise à trépaner | |
| Indhold | enkelt del |
Identification et classification
| Référence article | 118500 28 | |
| EAN / GTIN | 4045197037206 | |
| Réf. fabricant | 118500 28 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Tableau d’application
N
70
P
50
P
50
M
35
N
80
Description
Version:
Extremely strong and with perfect concentricity due to drill crown and shank of one piece (hardened).
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Application:
For use on stationary machines. Suitable for fibre-reinforced plastics (GRP and CRP).
Only for flat material up to 4 mm thickness.
Only for flat material up to 4 mm thickness.