{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Fraise à trépaner carbure brasé plat, ⌀ DC: 75mm
Réf.: 118500 75
Référence:
Détails du produit
Caractéristiques techniques
| Lubricante refrigerante | sí | |
| Posición de las interfaces | Lado de la máquina | |
| Tipo de asiento | Mango cilíndrico | |
| Forma de asiento | Superficie de sujeción recta | |
| Diseño de asiento | sistema métrico | |
| Tamaño de asiento, métrico | 13 mm | |
| Diámetro del mango | 13 mm | |
| Medida superior diámetro nominal | 0.1 mm | |
| Medida inferior diámetro nominal | -0.05 mm | |
| Ejecución del mango | HB | |
| Diámetro del filo, máx. | 75 mm | |
| Configurable | non | |
| Tolerancia diámetro del filo | tolérance fabricant | |
| Tolerancia del fabricante mín. | 0.1 mm | |
| Tolerancia del fabricante máx. | -0.05 mm | |
| Longitud de ranura de viruta | 8 mm | |
| Material de corte | MD | |
| Interfaz | interface 1 | |
| Longitud útil | 8 mm | |
| Sentido del corte | Corte a derecha | |
| Ejecución de la herramienta | Metal duro macizo | |
| Norma | Werksnorm | |
| Procedimiento de mecanizado | Taladrado al máximo | |
| Anillo de color | Sin | |
| Tipo de producto | Corona de perforación | |
| Contenido | pieza única |
Identification et classification
| Référence article | 118500 75 | |
| EAN / GTIN | 4045197037558 | |
| Réf. fabricant | 118500 75 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Tableau d’application
N
70
P
50
P
50
M
35
N
80
Description
Version:
Extremely strong and with perfect concentricity due to drill crown and shank of one piece (hardened).
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Application:
For use on stationary machines. Suitable for fibre-reinforced plastics (GRP and CRP).
Only for flat material up to 4 mm thickness.
Only for flat material up to 4 mm thickness.