{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Fraise à trépaner carbure brasé plat, ⌀ DC: 27mm
Réf.: 118500 27
Référence:
Détails du produit
Caractéristiques techniques
| Notranje hlajenje | ne | |
| Hladilno mazalno sredstvo | da | |
| Položaj vmesnika | na strani stroja | |
| Vrsta vpenjala | Cilindrično držalo | |
| Oblika vpenjala | ravna vpenjalna površina | |
| Izvedba vpenjala | metrično | |
| Velikost vpenjalnega trna, metrična | 10 mm | |
| Suha obdelava | primerno | |
| Premer držala | 10 mm | |
| Dolžina držala | 8 mm | |
| Premer rezila, min. | 27 mm | |
| Premer rezila, maks. | 27 mm | |
| Možnost konfiguracije | ne | |
| Toleranca premera reza | toleranca proizvajalca | |
| Toleranca proizvajalca min. | −0,05 mm | |
| Toleranca proizvajalca maks. | 0,1 mm | |
| Število stopnic | 1 | |
| Dolžina vpenjalnega utora | 8 mm | |
| Ime izdelka (tip) | K | |
| Rezalni material | HM | |
| Prevleka | neprevlečeno | |
| Vmesnik | ločilno mesto 1 | |
| Uporabna dolžina | 4 mm | |
| Smer rezanja | desnorezno | |
| Izvedba orodja | jekleni nosilec s spajkanimi rezalnimi vložki iz trdine po DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Standard | Werksnorm | |
| Postopek obdelave | cirkularno rezkanje (okroglo rezkanje) | |
| Barvni prstan | brez | |
| Vrsta izdelka | žage za luknje | |
| Vsebina | posamezni del |
Identification et classification
| Référence article | 118500 27 | |
| EAN / GTIN | 4045197037190 | |
| Réf. fabricant | 118500 27 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Tableau d’application
N
70
P
50
P
50
M
35
N
80
Description
Version:
Extremely strong and with perfect concentricity due to drill crown and shank of one piece (hardened).
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Narrow carbide cutting edges with positive rake and large clearance angle provide good cutting performance at low cutting pressure.
Exchangeable centre drill, shank with 3 clamping faces.
Cutting width 2 mm for all sizes. ⌀ tolerance: + 0.10 / − 0.05 mm.
Dimension L: all sizes = 8 mm.
Application:
For use on stationary machines. Suitable for fibre-reinforced plastics (GRP and CRP).
Only for flat material up to 4 mm thickness.
Only for flat material up to 4 mm thickness.