{{ name }}
Artiklové číslo {{ combinedCodeWithHighlight }}
Vaše materiálové číslo:
EAN / GTIN:
Číslo výrobce:
Katalogové číslo:
Cenově výhodné balení – spirálový vrták se stupňovitým hrotem HSS N, 1 kusů
Artiklové číslo: GG4005 5,1
Vaše materiálové číslo:
Údaje o výrobku
Technické údaje
| Through-coolant | no | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Number of tools | 10 pcs. | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 0051 mm | |
| Dry machining | suitable | |
| Shank diameter | 5.1 mm | |
| Shank length | 34 mm | |
| Shank type | HB | |
| Air | suitable | |
| Cutter diameter, min. | 5.1 mm | |
| Cutter diameter, max. | 5.1 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class ISO | h8 | |
| Flute length | 52 mm | |
| Number of teeth | 2 | |
| Twist direction | right-hand | |
| Angle, 1st step | 118 degrees | |
| Point geometry | N | |
| Product designation (type) | N | |
| Tool material | HSS | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Overall length | 86 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 338 | |
| Machining method | drilling into solid material | |
| Colour ring | without | |
| Type of product | indexable drill | |
| Content | set |
Identifikace a klasifikace
| Katalogové číslo | GG4005 5,1 | |
| EAN / GTIN | 4067263133537 | |
| Číslo výrobce | GG4005 5,1 | |
| Výrobce/odpovědná osoba | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Aplikační tabulka
N
70
N
70
N
50
P
30
P
27
P
22
P
10
K
25
N
50
Popis
Version:
Same as No. 114004.
Chamfers are nitrided. Particularly sturdy and robust due to the strengthened core diameter. Ground flutes, with high concentricity. Precision ground point. Three drive flats on the shank for use in a 3-jaw chuck.
With special cutter geometry also for use in stainless steels.
Chamfers are nitrided. Particularly sturdy and robust due to the strengthened core diameter. Ground flutes, with high concentricity. Precision ground point. Three drive flats on the shank for use in a 3-jaw chuck.
- Ideal for producing precise holes in sheet metal, pipes, and profiles.
- Reliable spot drilling without centring or centre punching – even on curved surfaces – thanks to innovative ground point.
- Oblique drilling possible without any problems after the first level of the drill tip has penetrated the material.
- Drilling with significantly less force required than with conventional DIN338 HSS drills – up to a diameter of 13 mm directly in the cordless drill/driver.
- Stable and secure form fit in the 3-jaw chuck.
- General use across a wide spectrum of materials including plastic, wood and acrylic without tearing or splintering.
- The drill does not rattle or dig in – even in the case of thin-walled materials.
- Burr-free drill exit.
- Ideal for drilling out bolts and rivets.
With special cutter geometry also for use in stainless steels.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.