{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
TPKT 1003PDR-MP, IC830, Type: UNI
Article no.: 226512 UNI
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | HELI3MILL | |
| Wet maximum | suitable | |
| Manufacturer’s designation | HM390 TPKT 1003PDR-MP IC830 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | triangular | |
| Width of insert B | 10.9 mm | |
| Thickness of insert S | 3.18 mm | |
| Length of insert L | 10.9 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 8 mm | |
| Diameter of insert d | 10.9 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 60 degrees | |
| Rake angle | 11 degrees | |
| ISO-Code | TPKT 1003PDR-MP | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | MP | |
| Cutting media, manufacturer’s designation | IC830 | |
| Coating | PVD | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 3 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Facility for resharpening | no | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Content | 10 pcs. | |
| Correction factor fz | 1.5 |
Identification & Classification
| Article number | 226512 UNI | |
| EAN / GTIN | 7291075313574 | |
| Manufacturer number | 3320756 |
Application Table
P
220
P
200
P
170
P
150
M
110
M
90
Description
Version:
Trigon indexable insert with 3 helical cutting edges. Axial and radial positive cutting edge design. For effective and precise machining of 90° shoulders.
Note:
Standard application values for ae = 0.3 to 1 × D / ap max = 8.0 mm.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.