{{ name }}
Art.-Nr. {{ combinedCodeWithHighlight }}
Sachnummer:
EAN / GTIN:
Herstellernummer:
VHM-Microfräser 1X12 mm
Artikel-Nr.: 201140 1X12
Sachnummer:
- Schneidstoff: VHM
- Norm: Werksnorm
- Typ: W
- Tolerance nominal ⌀: 0 / −0.005
- No. of teeth Z: 2
Produktdetails
Technische Daten
| Cutting edge ⌀ DC | 1 mm | |
| Beschichtung | DLC | |
| Schneidstoff | VHM | |
| Norm | Werksnorm | |
| Typ | W | |
| Tolerance nominal ⌀ | 0 / −0.005 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Eingriffsbreite ae bei Fräsoperation | Vollnut Schnitttiefe 1×D; 0,5×D bei Besäumen | |
| Shank | DIN 6535 HA to h5 | |
| Innenkühlung | nein | |
| Flute length Lc | 1.5 mm | |
| Overhang length L1 incl. recess | 12 mm | |
| Recess ⌀ D1 | 0.95 mm | |
| Overall length L | 50 mm | |
| Shank ⌀ Ds | 4 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in cast aluminium | 0.02 mm | |
| Feed fz for side milling in cast aluminium | 0.025 mm | |
| Correction factor ap corr | 0.35 | |
| Farbring | gelb | |
| Produktart | Eckfräser |
Identifikationsnummern & Klassifikationen
| Artikelnummer | 201140 1X12 | |
| EAN / GTIN | 4045197912909 |
Anwendertabelle
N
480
N
440
N
400
N
200
N
160
N
200
N
150
N
130
N
180
N
160
N
150
N
130
N
160
N
300
N
160
N
200
Beschreibung
Version:
With advanced DLC sp2 coating. For the highest demands regarding performance and precision in aluminium materials. Extremely tight tolerances ensure maximum accuracy. Double relief ground with 2 hollow-ground chamfers. Recess angle α = 16°.
Tolerances:
Tolerances:
- Neck ⌀: D1 = 0 / -0.01 mm.
Note:
At greater tool overhang lengths, use a reduced value for ap!
Values for:
slots milled from solid: ap = 0.25×D×ap corr
side milling: ap = 0.5×D×ap corr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)!
e.g: vf = 18000 [rpm]× fz [mm/Z]× z
Values for:
slots milled from solid: ap = 0.25×D×ap corr
side milling: ap = 0.5×D×ap corr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)!
e.g: vf = 18000 [rpm]× fz [mm/Z]× z