{{ name }}
Št. art. {{ combinedCodeWithHighlight }}
Koda izdelka:
EAN/GTIN:
Številka proizvajalca:
GARANT Power Drill indexable drill Combination shank 26 mm
Št. art.: 234015 26
Koda izdelka:
- Drill depth for indexable insert drill up to: 5×D
- Shank: ISO 9766
- Use for drilling: limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling
- Through-coolant: yes
- Machining strategy: HPC
Podrobnosti o izdelku
Tehnični podatki
| Series | Power Drill | |
| Nominal ⌀ D | 26 | |
| Drill depth for indexable insert drill up to | 5×D | |
| Shank | ISO 9766 | |
| Use for drilling | limited centre drilling; limited convexity; limited cross-drilling; limited drilling through a stack; limited drilling with oblique exit; limited cross-drilling | |
| Through-coolant | yes | |
| Machining strategy | HPC | |
| Reach L1 | 130 mm | |
| Overhang LA | 151 mm | |
| Shank ⌀ Ds | 32 mm | |
| Shank length Ls | 60 mm | |
| Maximum adjustment limit Vmax | 0.25 mm | |
| ISO code indexable insert | SOGX 080407 | |
| Pack of insert screws | 239700 8IP (1.3 Nm) | |
| Indexable insert type for internal cutter | HB6810; HB6535; HB6640; HB630 | |
| Number of cutting edges Z | 1 | |
| Type of product | Indexable drill |
Identifikacijske številke in klasifikacije
| Številka izdelka | 234015 26 | |
| EAN/GTIN | 4045197697233 |
Opis
Izvedba:
Zaviti hladilni kanali zagotavljajo največjo trdnost, saj jedro svedra zaradi njih ni oslabljeno.
Toleranca izvrtine: −0,1/+0,35 mm
Toleranca izvrtine: −0,1/+0,35 mm
Opis:
Za največjo zmogljivost in natančnost mer. Tudi pri težavnem vrtanju do 5×D.
Uporaba:
Primerno za:
Obračalne ploščice SOGX 080407.
Priporočilo:
Pri navrtanju zmanjšajte podajanje na 70 %.
Opomba:
Druge vmesne velikosti v 1/10-enotah so dobavljive po ponudbi.