{{ name }}
Št. art. {{ combinedCodeWithHighlight }}
Koda izdelka:
EAN/GTIN:
Številka proizvajalca:
Sveder HOLEX Pro Steel VHM, cilindrično držalo DIN 6535 HA 3/32
Št. art.: 122501 3/32
Koda izdelka:
- Rezalni material: VHM
- Standard: DIN 6537 K
- Izvedba: 4×D
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Podrobnosti o izdelku
Tehnični podatki
| Serija | Pro Steel | |
| Inch nominal ⌀ corresponds to | 2.38 mm | |
| Prevleka | TiAlN | |
| Rezalni material | VHM | |
| Standard | DIN 6537 K | |
| Izvedba | 4×D | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Kot konice | 140 stopinj | |
| recommended maximum drilling depth L2 | 10.9 mm | |
| Držalo | DIN 6535 HA s h6 | |
| z notranjim hlajenjem | ne | |
| Strategija odrezovanja | HPC | |
| Polstandardno | da | |
| Flute length Lc | 14.5 mm | |
| Overall length L | 55 mm | |
| Shank ⌀ Ds | 4 mm | |
| Feed f in steel < 900 N/mm2 | 0.09 mm/rev. | |
| Barvni prstan | zelena | |
| Vrsta izdelka | Spiralni svedri |
Identifikacijske številke in klasifikacije
| Številka izdelka | 122501 3/32 | |
| EAN/GTIN | 4062406108960 |
Tabela aplikacije
P
115
P
105
P
85
P
80
P
60
M
30
M
25
K
90
K
55
Opis
Version:
Straight major cutting edges and a special flute profile ensure a good chip evacuation. The robust cutter geometry ensures high-performance drilling with good process reliability.
A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and an extremely wear-resistant coating.
Up to ⌀ 1.9 with 4 facets, from ⌀ 2 with relieved cone.
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. Straight major cutting edges with slightly honed edges and special flute profile produce short chips.
A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and an extremely wear-resistant coating.
Up to ⌀ 1.9 with 4 facets, from ⌀ 2 with relieved cone.
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. Straight major cutting edges with slightly honed edges and special flute profile produce short chips.