{{ name }}
Št. art. {{ combinedCodeWithHighlight }}
Koda izdelka:
EAN/GTIN:
Številka proizvajalca:
Pritezni čep zatesnjen, oblika B 40
Št. art.: 308650 40
Koda izdelka:
- Standard priteznih čepov: ISO 7388
Podrobnosti o izdelku
Tehnični podatki
| za strmi konus | 40 | |
| Značilnosti izvrtine | z izvrtino | |
| Standard priteznih čepov | ISO 7388 | |
| ⌀ zveze D | 22,5 mm | |
| ⌀ glave D1 | 18,95 mm | |
| Celotna dolžina L | 44,5 mm | |
| L1 | 16,25 mm | |
| Navoj M | M16 | |
| Maksimalni zatezni moment | 50 Nm | |
| za strmi konus z barvno kodo | SK 40 | |
| Zev ključa | 18 mm | |
| Vrsta izdelka | Pritezni čep |
Identifikacijske številke in klasifikacije
| Številka izdelka | 308650 40 | |
| EAN/GTIN | 4045197150981 |
Opis
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.