{{ name }}
N.º do artigo {{ combinedCodeWithHighlight }}
Código do artigo:
EAN/GTIN:
Número do fabricante:
N.º de cat.:
Tornillo de apriete todo acero classiX GS 250/120
N.º do artigo: GS25
Código do artigo:
Tenha em atenção o prazo de entrega e recomendação:
Efetuamos o pedido deste artigo diretamente ao fabricante, uma vez que não faz parte da nossa gama principal e, como tal, não temos em stock.
InformaçãoDetalhes dos produtos
Dados Técnicos
| Seria | classiX | |
| Oznaczenie producenta | Ganzstahl-Schraubzwinge classiX | |
| Rodzaj produktu | Ściski | |
| Rodzaj ścisku | ściski | |
| Zasięg maks. | 120 mm | |
| Maks. siła mocowania | 5 000 N | |
| Rozstaw maks. | 250 mm | |
| Materiał ramion napinających | stal | |
| Grubość szyny ślizgowej | 10,5 mm | |
| Szerokość szyny ślizgowej | 22 mm | |
| Materiał szyny ślizgowej | stal | |
| Gwint wrzeciona | Gwint trapezowy | |
| Tryb obsługi | Obsługa oburącz | |
| Możliwość użycia do | drewno; stal | |
| Z płytą dociskową | tak | |
| Zawartość | część pojedyncza |
Identificação e classificação
| Número do artigo | GS25 | |
| EAN/GTIN | 4008158024622 | |
| Número do fabricante | GS25 | |
| Número L | L80070 142 | |
| Fabricante/responsável | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 Bietigheim-Bissingen, Germany, www.bessey.de |
Descrição
Description:
- Clamping force up to 5,000 N
- Fixed jaw and sliding arm are constructed of tempered steel for resilient clamping
- Ergonomically shaped wood handle
Feature:
- Overhead: 120 mm
- Material / surface:
- Fixed and sliding bracket made of tempered steel, galvanized
- Spindle with trapezoidal thread made of steel rolled, burnished
- Wooden handle, water-based lacquer
- Pressure plate made of steel, cold pressed, galvanized
- Rail: 22x10.5 mm
- Wingspan: 250 mm
Application:
- Interior fittings
- Metal construction
- DIY
- Furniture and joinery works
- Locksmith work
- For clamping resiliently, elastically and powerfully
Note:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean and oil the spindle regularly
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain)
- Clean and oil the pressure plate regularly