{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
simturn AX copying insert, right-hand, L2 = 15 mm, ⌀ Dmin: 3mm
Article no.: 270653 3
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | simturn AX Kopiereinsatz rechts | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Blade thickness | 5 mm | |
| Insert length | 39.5 mm | |
| Insert version | right-hand | |
| Tool material | HC | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | P05-P35; M05-M25; K05-K25 | |
| Coating | coated | |
| Insert thickness | 5 mm | |
| Type of fastening for insert | C (without hole clamped from above) | |
| Interface coding for insert | ZYL | |
| Interface coding for insert according to ISO TS 13399-60 | ZYL | |
| Type of product | Cutter insert | |
| Number of teeth | 1 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Machining method | plunging (ESE) | |
| Finishing / roughing assignment | Finishing | |
| Cutting conditions | continuous | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 270653 3 | |
| EAN / GTIN | 2050002078857 | |
| Manufacturer number | A05.JCAK.A | |
| Manufacturer/responsible person | SIMTEK Präzisionswerkzeuge GmbH, Christophstraße 18, 72116 MÖSSINGEN, Germany, www.simtek.com |
Application Table
N
400
N
240
P
180
P
130
M
100
M
70
S
40
K
110
N
210
