{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
SUMOCHAM drill body Weldon shank DCN A, 1.5×D, Size: 20
Article no.: 231702 20
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Series | SUMOCHAM | |
| Manufacturer’s designation | DCN 200-030-25A-1.5D | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | with longitudinal slot | |
| Holder version | metric | |
| Holder size, metric | 0250 mm | |
| Shank diameter | 25 mm | |
| Shank length | 56 mm | |
| Tolerance Class | h6 | |
| Shank type | HA | |
| Cutter diameter, min. | 20 mm | |
| Cutter diameter, max. | 20.9 mm | |
| Collar diameter | 32 mm | |
| Flute length | 33.02 mm | |
| Number of cutting edges, total | 2 | |
| Guide elements | without guide elements | |
| Type of fastening for insert | C (without hole clamped from above) | |
| Interface coding for insert | S | |
| Insert designation | ICP; ICP 200 | |
| Interface | joint 1 | |
| Gauge length | 61.6 mm | |
| Usable length | 33.02 mm | |
| Overall length | 117.6 mm | |
| Functional length | 57.96 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Machining method | drilling into solid material | |
| Type of product | indexable drill for cutter inserts | |
| Content | single part |
Identification & Classification
| Article number | 231702 20 | |
| EAN / GTIN | 7291075290615 | |
| Manufacturer number | 3202613 |
Description
Version:
SUMOCHAM interchangeable head drilling system for highly efficient drilling with interchangeable drilling heads. Unique clamping mechanism for convenient fixing of the drilling head without additional clamping screw. Versatile material use due to comprehensive drilling head range. Optimum tool stability with twisted coolant channels for high concentricity and lowest possible axial run-out of the bore. Other available versions: base body with round shank, base body for machining chamfers on bores when a chamfer ring is attached, base body especially for use in multi-spindle, sliding headstock and production lathes.
Tolerance class: IT8-IT9, concentricity: 0.03 mm.
Tolerance class: IT8-IT9, concentricity: 0.03 mm.
Application:
Supplied with:
Drill body incl. assembly key for drilling heads.
Note:
- Always select a strategy with medium cutting speeds and high feed rates.
- No rapid traverse and no spindle anti-clockwise rotation during retraction.
- Drilling convex / concave surfaces: Radius of curvature > 15 × DC required, reduce feed rate by up to 50%.
- For cross holes, the maximum permissible diameter is 1/4 of the nominal diameter DC.
- Stack drilling requires stable conditions, reduce gaps between workpiece elements.
- Oblique drill entry and exit up to 7° inclination possible with reduced feed rate (approx. 20 - 30%).
- Designation convention: DCN [size]-[L1]-[⌀DS]A-[L/D]
Examples:
No. 231702 6 DCN 060-009-12A-1.5D
No. 231705 6 DCN 060-018-12A-3D