{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pair of heat-resistant gloves, Glove size: 10
Article no.: 094645 10
Article code:
Product details
Technical Data
| Heat-resistant up to | 250 degrees | |
| Contents pairs | 1 pair | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 2 | |
| Resistance to cuts (Coupe test) | 1 | |
| Tear propagation resistance | 3 | |
| Resistance to penetration | 1 | |
| Resistance to cuts (TDM) | X | |
| Impact protection | not defined | |
| A: Behaviour when exposed to fire, EN 407 | 4 | |
| B: Contact heat, EN 407 | 2 | |
| C: Convection heat, EN 407 | 3 | |
| D: Radiated heat, EN 407 | 1 | |
| E: small molten spatters, EN 407 | X | |
| F: large molten spatters, EN 407 | X | |
| Material of coating, the palms of the hands | neoprene | |
| EN 407 code | 4231XX | |
| EN 388 code | 2131X | |
| Colour | black | |
| Type of product | gloves | |
| Area of application | heat protection; cut protection | |
| Glove size | 10 | |
| Scope of application | all-round | |
| Version | five-fingered | |
| Reuse | reusable | |
| Unit | pair | |
| Knitted technology (fineness) | 10G | |
| Standard | EN 388; EN 407; EN ISO 21420 | |
| Backing material | acrylic | |
| Coating | the palms of the hands | |
| Lined | no | |
| Protection category | III |
Identification & Classification
| Article number | 094645 10 | |
| EAN / GTIN | 4062406273316 | |
| Manufacturer number | 094645 10 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
HOLEX heat-resistant gloves with fire-resistant 10-gauge knit, ideal for working on hot parts.
Standard:
EN 388; EN 407; EN ISO 21420
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect hands against mechanical risks, abrasions, blisters and contact heat up to 250°C.
- For work with hot and dry to slightly wet and oily workpieces.
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
Reasonably foreseeable misuse
- Offer no protection against chemical, microbiological, electrical or laceration risks.
- Do not wear when close to rotating machine parts.
- Do not continue using gloves following contact with fire.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.