{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pair of gloves Cut E, Glove size: 7
Article no.: 094613 7
Article code:
Product details
Technical Data
| Quality and test seal | Oeko-Tex® Standard 100 | |
| Contents pairs | 1 pair | |
| Cut protection class, EN 388 | E | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 4 | |
| Resistance to cuts (Coupe test) | 4 | |
| Tear propagation resistance | 4 | |
| Resistance to penetration | 3 | |
| Resistance to cuts (TDM) | E | |
| Impact protection | not defined | |
| Material of coating, the palms of the hands | nitrile foam | |
| EN 388 code | 4443E | |
| Colour | grey; black | |
| Type of product | gloves | |
| Area of application | cut protection | |
| Glove size | 7 | |
| Scope of application | all-round | |
| Version | five-fingered | |
| Reuse | reusable | |
| Unit | pair | |
| Knitted technology (fineness) | 15G | |
| Standard | EN 388; EN ISO 21420 | |
| Backing material | Dytec® | |
| Coating | the palms of the hands | |
| Lined | no | |
| Protection category | II |
Identification & Classification
| Article number | 094613 7 | |
| EAN / GTIN | 4062406132415 | |
| Manufacturer number | 094613 7 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Gloves with new fibre technology completely without glass fibres or steel fibres. Coating of nitrile foam. Oeko-Tex Standard 100.
HOLEX Cut E. Cut-resistant gloves with cut protection level E and 15-gauge knitting technology for variable activities with extreme cut hazards.
HOLEX Cut E. Cut-resistant gloves with cut protection level E and 15-gauge knitting technology for variable activities with extreme cut hazards.
Standard:
EN 388; EN ISO 21420
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect hands against mechanical risks, abrasion, blisters, and other superficial injuries.
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
- For precision work in oily or wet conditions.
Reasonably foreseeable misuse
- Gloves offer no protection against chemical, microbiological, thermal, electrical or laceration risks.
- Do not wear when close to rotating machine parts.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.