{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Axial milling cutter spigot VARIA VX3, VX3, Spigot ⌀ d1: 16mm
Article no.: 319835 16
Article code:
Product details
Technical Data
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | no | |
| Holder type | milling arbor mounting | |
| Interface coding | EWC00300215 | |
| Holder shape | with longitudinal and cross-slot | |
| Holder version | dimensionless nominal size without cooling | |
| Holder size, no dimensions | 0160 | |
| Type of mounting | spigot | |
| Shank length | 28 mm | |
| Interface on machine side | VX3 | |
| Gauge length | 48.9 mm | |
| External diameter, tool-end | 34 mm | |
| Body length (tool side) | 25 mm | |
| Width across flats | 8 mm | |
| Interface | joint 1; joint 2 | |
| Type of product | face mill arbor | |
| Overall length | 75.1 mm | |
| Overall height | 34 mm | |
| Overall width | 34 mm | |
| With width across flats | yes | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 319835 16 | |
| EAN / GTIN | 2050001743534 | |
| Manufacturer number | 42.VX316L08 | |
| Manufacturer/responsible person | EWS Weigele GmbH & Co. KG, Maybachstraße 1, 73066 Uhingen, Germany, www.ews-tools.de |
Description
Version:
VX − Three-point clamping of the integral segment ring, free of transverse forces. Polygon torque resistance up to 200 Nm.
Advantage:
- Quick change using a single clamping point, therefore tool change without risk of injury.
- Cutter tools lie pre-set at the machine.
- Compact design - low unit costs.
Application:
With drive keyway. For milling cutters with keyways and cross slots.
Note:
Internal cooling supplied on request.
Maximum tightening torque for VX3 and VX4 is 5.7 Nm, which can be achieved using the appropriate torque screwdriver No. 211750 size 5.7. Maximum tightening torque for V5 is 10 Nm. When releasing the deposits, do not travel beyond the stop. We recommend the EWS Clean and cleaning set for cleaning the Varia toolholders and replaceable inserts.
Maximum tightening torque for VX3 and VX4 is 5.7 Nm, which can be achieved using the appropriate torque screwdriver No. 211750 size 5.7. Maximum tightening torque for V5 is 10 Nm. When releasing the deposits, do not travel beyond the stop. We recommend the EWS Clean and cleaning set for cleaning the Varia toolholders and replaceable inserts.