{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Face turning tool right-hand, similar to DIN 4977 (ISO 5), P20/K25, Shank square: 12mm
Article no.: 296705 12
Article code:
Product details
Technical Data
| Overall length | 100 mm | |
| Shank form | square | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 4977 | |
| Shank width | 12 mm | |
| Shank height | 12 mm | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Type of product delete( ) | turning tool | |
| Content | single part |
Identification & Classification
| Article number | 296705 12 | |
| EAN / GTIN | 4045197884930 | |
| Manufacturer number | 296705 12 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Carbide − steel shanks with 700 - 800 N/mm2 strength and flat chamfered mounting surface. Fitted with diamond ground carbide inserts. Angles on the inserts are precision ground. All turning tools are supplied with sharp cutting edges. Sharpening the cutting edge with a boron carbide hand lapper will increase the tool edge life. The extent of the wear area is dependent on the cutting conditions. For roughing and interrupted machining it is imperative that the cutting edges are sharpened.
Fitted with diamond ground carbide inserts.
Fitted with diamond ground carbide inserts.
Application:
P20/K25 for machining steel and cast iron.
M20 for machining stainless steels.
M20 for machining stainless steels.
Attention:
For rough and interrupted machining the cutting edges should be sharpened with a boron carbide hand lapper (No. 558812).