{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Face turning tool right-hand, similar to DIN 4977 (ISO 5), P20/K25, Shank square: 10mm
Article no.: 296705 10
Article code:
Product details
Technical Data
| Overall length | 90 mm | |
| Shank form | square | |
| Cutting direction | right-hand cutting | |
| Holder form | offset | |
| Machining method | external turning | |
| Standard | DIN 4977 | |
| Shank width | 10 mm | |
| Shank height | 10 mm | |
| Tool material | HC-P20 | |
| Standard designation for cutting medium, 2nd Priority | HC-K25 | |
| Machining group | K (cast iron); P (steel) | |
| Coating | uncoated | |
| Type of product | Turning tool |
Identification & Classification
| Article number | 296705 10 | |
| EAN / GTIN | 4045197884923 | |
| Manufacturer number | 296705 10 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Carbide − steel shanks with 700 - 800 N/mm2 strength and flat chamfered mounting surface. Fitted with diamond ground carbide inserts. Angles on the inserts are precision ground. All turning tools are supplied with sharp cutting edges. Sharpening the cutting edge with a boron carbide hand lapper will increase the tool edge life. The extent of the wear area is dependent on the cutting conditions. For roughing and interrupted machining it is imperative that the cutting edges are sharpened.
Fitted with diamond ground carbide inserts.
Fitted with diamond ground carbide inserts.
Application:
P20/K25 for machining steel and cast iron.
M20 for machining stainless steels.
M20 for machining stainless steels.
Attention:
For rough and interrupted machining the cutting edges should be sharpened with a boron carbide hand lapper (No. 558812).