{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
RDHW 1003 MOT, HB7605, Type: HART
Article no.: 212251 HART
Article code:
Product details
Technical Data
| Machining method | face milling (FPL) | |
| Tool material | Carbide | |
| Insert designation | RDHW 1003 MOT | |
| Grade | HB7605 | |
| Diameter of insert d | 10 mm | |
| Thickness of insert S | 3.18 mm | |
| Coating | PVD | |
| Suitable for material | hardened steel (H); steel (P) | |
| Through-coolant | no | |
| Max. cutting depth ap | 2 mm; 2.5 mm | |
| Wet maximum | suitable only under restricted conditions | |
| Dry machining | suitable | |
| Cooling lubricant | yes | |
| Base form | round | |
| Insert version | neutral | |
| Height of cutting edge | 3.18 mm | |
| Rake face chamfer width C | 0.1 mm | |
| Rake face chamfer angle | 20 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| ISO-Code | RDHW 1003 MOT | |
| Attachment hole diameter | 3.99 mm | |
| Cutting depth ap, min. | 0.15 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Feed rate per tooth min. fz | 0.16 mm | |
| Feed rate per tooth max. fz | 0.16 mm | |
| Standard designation for cutting medium, 2nd Priority | K | |
| Machining group | H (hard materials); P (steel) | |
| Cutting media, manufacturer’s designation | HB7605 | |
| Insert thickness T | 3.18 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 1 pcs. | |
| Direction of action | neutral | |
| Tolerance Class | H | |
| Type of fastening | hole | |
| Cutter version | chamfered (T) | |
| Number of potential uses | 1 pcs. | |
| Weight | 3 g | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 212251 HART | |
| EAN / GTIN | 4067263499541 | |
| Manufacturer number | 212251 HART | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
180
P
140
H
170
H
160
H
130
Description
Version:
All indexable inserts are suitable for use with carriers that are 0° negative and also with carriers that are 7° positive.
Note:
Standard application values for ae = 0.3×D / apmax = 2 mm.