{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Revolving lathe centre 60°, Morse taper: 1
Article no.: 320660 1
Article code:
Product details
Technical Data
| Totale lengte | 114,2 mm | |
| Kopdiameter | 34,5 mm | |
| Uitvoering centreerpunt | meelopend | |
| Tophoek | 60 graden | |
| Grootste puntdiameter | 15 mm | |
| Stompe conus aan kopse kant | nee | |
| Opname aan machinezijde | MK1 | |
| Met afdrukschroefdraad | nee | |
| Met spanvlakken | nee | |
| Met hardmetalen punt | nee | |
| Met schokdemping | nee | |
| Nuttige lengte | 60,5 mm | |
| Werkstukgewicht max. | 100 kg | |
| Maximale rondloopfout | 0,005 mm | |
| Halve centreerpunt | nee | |
| Verwisselbare centreerpunten inbegrepen | nee | |
| Met drukweergave | no | |
| Toepassing | draaien | |
| Gewicht | 0,4 kg | |
| Producttype | centreerpunt |
Identification & Classification
| Article number | 320660 1 | |
| EAN / GTIN | 4019208014418 | |
| Manufacturer number | 043400 | |
| Manufacturer/responsible person | Röhm GmbH, Heinrich-Röhm-Straße 50, 89567 Sontheim/BRZ, Deutschland, www.roehm.biz |
Description
Version:
- Body and live centre hardened.
- Live centre through hardened, multiple regrinding possible.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
- Point angle 60°.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For all types of lathe, equally suitable for roughing and finish turning.