{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 185820 63X4
Side milling cutter HSS-Co5, uncoated, ⌀×width ± 0.1×k11: 63X4mm
Article no.: 185005 63X4
Article code:
- Tool material: HSS Co 5
- Standard: DIN 885 A
- Type: N
- Tolerance nominal ⌀: ± 0.1
- Cutting width ae for milling operation: Full slot cutting depth 1×D
Product details
Technical Data
| Cutting edge ⌀ DC | 63 mm | |
| Cutting width | 4 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 5 | |
| Standard | DIN 885 A | |
| Type | N | |
| Tolerance nominal ⌀ | ± 0.1 | |
| Bore ⌀ H6 d1 | 22 mm | |
| No. of teeth Z | 18 | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Collar thickness b ±0.1 | 2.8 mm | |
| Collar ⌀ d2 ±1 | 40 mm | |
| Tooth height Zh | 11.5 mm | |
| Capability of combining 2 cutters of the same width A/B | 4 mm | |
| Capability of combining 2 cutters of the same width, results in overall width E | 7.7 mm - 7.8 mm | |
| Feed fz in steel < 900 N/mm2 | 0.05 mm | |
| Through-coolant | no | |
| Shank type | with bore | |
| Colour ring | without | |
| Type of product | Side milling cutter |
Identification numbers & Classifications
| Article number | 185005 63X4 | |
| Manufacturer number | 185005 63X4 |
Application Table
N
200
P
19
P
19
P
19
M
9
N
180
Description
Version:
Side milling cutter similar to DIN 885-A.
Pairs of milling cutters: Cutters with the same ⌀ and same number of teeth can be combined as a set and adjusted to the required width. Since the cutters have no raised bore collar, the staggered teeth mesh with each other.
2-piece sets are particularly economical. By reversing the side milling cutters, both side edges of each cutter can be used.
Pairs of milling cutters: Cutters with the same ⌀ and same number of teeth can be combined as a set and adjusted to the required width. Since the cutters have no raised bore collar, the staggered teeth mesh with each other.
2-piece sets are particularly economical. By reversing the side milling cutters, both side edges of each cutter can be used.
Note:
- Do not clamp the cutters in a set without a sufficiently thick arbor spacer ring, otherwise the cutters will be damaged.
- See Group 30 for suitable arbor spacer rings.
Cutters are manufactured with external ⌀ to a tolerance ± 0.1 mm When using 2 cutters as a set and higher precision is required, the cutters must be ground as a set.
Slots milled from solid: fz for ae = 0.1×D.