{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling CPHX 060210 ER, for precision finishing cutters, HB7705
Article no.: 212558 HART
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | CPHX 060210 ER | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Insert width | 6,3 mm | |
| Blade thickness | 2,38 mm | |
| Insert length | 6,3 mm | |
| Insert version | right-hand | |
| Cutting edge length | 6,3 mm | |
| Insert diameter | 6,3 mm | |
| Corner radius | 1 mm | |
| Corner chamfer length | 0 mm | |
| Corner chamfer angle | 4,75 degrees | |
| Corner angle | 80 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 0 degrees | |
| Setting angle | 90,5 degrees | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 11 degrees | |
| Normal clearance angle (flat cutting edge) | 11 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | CPHX 060210 ER | |
| Attachment hole diameter | 2,38 mm | |
| Type of chip breaker | EL-U | |
| Wiper length axial | 0,5 mm | |
| Wiper length radial | 0,8 mm | |
| Tool material | Carbide | |
| Machining group | H (hard materials) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | HB7705 | |
| Coating | TiC | |
| Grade | HB7705 | |
| Insert thickness | 2,38 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | CPHX 060210 ER | |
| Interface coding for insert according to ISO TS 13399-60 | CP0602103R | |
| Insert designation | CPHX 060210 ER | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | hardened steel (H) | |
| Tolerance Class | H | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | continuous | |
| Number of potential uses | 2 pcs. | |
| Weight | 1 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2,5 |
Identification & Classification
| Article number | 212558 HART | |
| EAN / GTIN | 4062406099176 | |
| Manufacturer number | 212558 HART | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
P
320
H
200
H
180
H
160
K
300
Description
Version:
- Inserts with improved wiper geometry for more efficient machine processes in tool and die manufacture.
- Extreme time saving available due to large stepover and high feed rate per tooth.
- Milling inserts with radial and axial wiper geometry.
Concentricity ± 0.020 mm.
Recommendation:
For pure face milling operations, reduce Vc by 30%.
Note:
Standard application values for ae 0.2 mm.
Lwa represents the axial wiper length.
Lwr represents the radial wiper length.
Lwa represents the axial wiper length.
Lwr represents the radial wiper length.