{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide HPC deep-hole drill plain shank DIN 6535 HA 40×D TiAlN 8 mm GARANT
Article no.: 123740 8
Article code:
Product details
Technical Data
| Through-coolant | yes, with 40 bar | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | straight clamping flat | |
| Holder version | metric | |
| Holder size, metric | 0080 mm | |
| Holder tolerance class | h$05 | |
| Shank diameter | 8 mm | |
| Shank type | HA | |
| Cutter diameter, min. | 8 mm | |
| Cutter diameter, max. | 8 mm | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Flute length | 340 mm | |
| Number of teeth | 2 | |
| Twist direction | right-hand | |
| Helix angle, min. | 30 degrees | |
| Angle, 1st step | 135 degrees | |
| Product designation (type) | H | |
| Pilot drill required | yes | |
| Tool material | solid carbide | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Gauge length | 349 mm | |
| Usable length | 328 mm | |
| Overall length | 385 mm | |
| Weight | 140 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | drilling into solid material | |
| Colour ring | green | |
| Machining strategy | HPC | |
| Type of product | indexable drill | |
| Content | single part |
Identification & Classification
| Article number | 123740 8 | |
| EAN / GTIN | 4045197498236 | |
| Manufacturer number | 123740 8 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
P
75
P
60
P
60
P
60
P
50
M
40
M
35
K
65
Description
Version:
Spiral fluted, with 4 guide chamfers and internal cooling channels. New generation of high performance deep hole drills in the HPC range. With 135° point angle and special fg6 cutting edge tolerance for optimum generation of deep holes. High roundness and alignment accuracy of the deep hole.
Note:
Flute length LC = L2 + 1.5 × DC.
To achieve good process reliability with 40×D and 50×D deep hole drills it is absolutely essential to drill a pilot hole with maximum drilling depth with drill No. 122736 and a 20×D co-pilot hole with a co-pilot drill No. 123691.The generation of a pilot hole improves process reliability.
To achieve good process reliability with 40×D and 50×D deep hole drills it is absolutely essential to drill a pilot hole with maximum drilling depth with drill No. 122736 and a 20×D co-pilot hole with a co-pilot drill No. 123691.The generation of a pilot hole improves process reliability.