Hoffmann Group Home
  • 500.000 listed articles
  • Delivery in 48h
  • TÜV certified quality of delivery
      • Menu
      Article no.: 202272

      Solid carbide end mills MTC DLC 4 mm GARANT

      Brand: GARANT
      Helix angle characteristic unequal spacing
      Cutting width a<sub>e</sub> for milling operation 0.5×D for side milling
      Tool material Solid carbide
      Cutting width a<sub>e</sub> for milling operation Full slot cutting depth 1×D
      Machining strategy MTC
      Norm DIN 6527
      Type W
      No price available

      Solid carbide end mills MTC DLC 4 mm GARANT

      Subsequent delivery

      Description

      Version:

      With the latest generation of DLC coating sp2.
      Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium components.
      Without 45º corner chamfer.
      Lengths similar to DIN 6527 long.
      Size 1–2 – tolerance: Size nominal ⌀ DC = e8.
      Size 2.5–20M – tolerance: Size nominal ⌀ DC = h6.

      Application:

      Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.

      Application Table

      Aluminium
      N
      480
      Aluminium (short chipping)
      N
      440
      Alu > 10% Si
      N
      400
      PMMA acrylic
      N
      180
      PEEK
      N
      130
      AFRP aramid
      N
      110
      PVDF GF20
      N
      180
      PA 66 GF30
      N
      150
      PEEK GF30
      N
      130
      PTFE CF25
      N
      160
      Honeycomb sandwich
      N
      300
      Hybrids
       
      wet maximum
       
      wet minimum
       
      dry
       
      Air