{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Die-cast zinc screw clamp LM 250/100
Article no.: LM25/10
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Clamp |
Identification numbers & Classifications
| Article number | LM25/10 | |
| EAN / GTIN | 4008158006246 | |
| Manufacturer number | LM25/10 | |
| L-Number | L80030 466 |
Description
Description:
- Clamping force up to 1,500 N
- Clamping arms manufactured in toughened die cast zinc black powder coated to prevent chemical corrosion
- Comes with protective cap
- Small and easy to handle
- Light weight
Feature:
- Overhead: 100 mm
- Material / surface:
- Upper and lower parts made of die-cast zinc, powder-coated
- Full-profile rail made of steel, cold-drawn, galvanized
- Spindle with trapezoidal thread made of rolled steel, galvanized
- Wooden handle, water-based lacquer
- Pressure plate made of steel, cold pressed, galvanized
- Plastic protective caps
- Rail: 25x6 mm
- Wingspan: 250 mm
Application:
- Interior fittings
- DIY
- Furniture and joinery works
- Kitchen construction and shop fitting
- Rapid, gentle clamping
Note:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- Clean and oil the pressure plate regularly