{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Chamfer mill 45°, with thread, ⌀ D: 33,5mm
Article no.: 216102 33,5
Article code:
- Chamfering angle reverse: 45
- Through-coolant: yes
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 33.5 mm | |
| Shank type | with threaded shank | |
| Chamfering angle reverse | 45 degrees | |
| Through-coolant | yes | |
| Tool exchange | PowerCard | |
| Number of cutting edges Z | 5 | |
| Minimum infeed ⌀ Dmin | 46 mm | |
| maximum chamfering ⌀ Dmax | 45.8 mm | |
| Overhang L1 | 24 mm | |
| ⌀ D1 h6 | 17 mm | |
| Overall length Ltot | 40 mm | |
| ⌀ D2 | 28.7 mm | |
| Mounting thread M | M16 | |
| suitable indexable insert | SD.. 090308 | |
| Set of insert screws | 219805 (15IP; 3.8 Nm) | |
| Type of product | Indexable end mill |
Identification & Classification
| Article number | 216102 33,5 | |
| EAN / GTIN | 4045197469953 | |
| Manufacturer number | 216102 33,5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |