{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
diamond riffler file hand DF 914 150mm D91 (fine) for complex geometries on hard materials
Article no.: 4007220016961
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Technical Data
| Type of product | Riffler file |
Identification numbers & Classifications
| Article number | 4007220016961 | |
| EAN / GTIN | 4007220016961 | |
| Manufacturer number | 15209141 | |
| L-Number | L51060 576 |
Description
Description:
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on. Diamond files and sheets are also used for processing hardened steel. The working temperatures are so low that no chemical wear occurs. This allows the higher hardness of the diamond grain to be exploited for a longer tool life. Diamond riffler files are used for work in hard-to-reach areas and on complex geometries. The coating length is 25 mm on both sides of the files.
Feature:
- Shape: Hand
- Width, metric: 3.8 mm
- Grit size: D 91
- Height: 1.6 mm
- Length, coating: 25 mm
- Length, total: 150 mm
Application:
- Recommendations for use: Apply only slight pressure to the file, especially in workpiece edge areas. Loaded diamond files can be cleaned in kerosene or anti-static plastic cleaner with a file brush. Alternatively, ultrasonic cleaning is also possible. Often it will suffice to knock the file against a hard object. Avoid using grease!
- Applications: Deburring; Finishing; Leveling; Removing oxide layers; Working on edges; Working on edges (chamfering, rounding)
- Drive types: Manual application
Material:
- Materials that can be worked:
- Abrasive materials
- Case-hardened steels
- Ferrite (magnetic material)
- Glass
- Graphite and synthetic carbon
- Nickel or titanium-based superalloys
- Steel materials with a hardness > 54 HRC
- Technical ceramics
- Tool steels
- Tungsten carbide
- Materials that can be worked: Abrasive materials; Case-hardened steels; Ferrite (magnetic material); Glass; Graphite and synthetic carbon; Nickel or titanium-based superalloys; Steel materials with a hardness > 54 HRC; Technical ceramics; Tool steels; Tungsten carbide
Supplied with:
- Customer-specific tool solutions are available on request.