{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing / finishing milling head, 45° chamfer, HB730, ⌀ D h10: 10mm
Article no.: 210270 10
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Milling profile: NF
- Number of cutting edges Z: 4
Product details
Technical Data
| Series | TopCut | |
| Cutter ⌀ D | 10 mm | |
| Grade | HB730 | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Milling profile | NF | |
| Number of cutting edges Z | 4 | |
| Helix angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.3×D for side milling | |
| Machining strategy | HPC | |
| Through-coolant | no | |
| Arbor size | 10 mm | |
| suitable arbor | GARANT TopCut | |
| Head length l | 13 mm | |
| Flute length L2 | 7.5 mm | |
| Corner chamfer width at 45° | 0.2 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.04 mm | |
| Feed fz for side milling in steel < 900 N/mm2 | 0.06 mm | |
| Type of product | Cutter insert for milling |
Identification numbers & Classifications
| Article number | 210270 10 | |
| EAN / GTIN | 4045197522221 | |
| Manufacturer number | 210270 10 |
Application Table
P
210
P
170
P
150
P
130
P
110
H
50
H
40
M
80
M
50
S
80
K
160
Description
Note:
Standard application values for ap max ≤ 0.5×D.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Roughing / finishing milling head, 45° chamfer, HB730, ⌀ D h10: 10mm
on request
In stock
25 pieces in stock
£64.76
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
£71.29
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
48 pieces in stock
£77.82
plus VAT at the current rate
Prices plus delivery costs
|
|
| Type | N | N | N |
| Feed fz for side milling in steel < 900 N/mm2 | 0.06 mm | 0.06 mm | 0.08 mm |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.04 mm | 0.04 mm | 0.06 mm |
| Machining strategy | HPC | HPC | HPC |
| Direction of infeed | horizontal, oblique and vertical | horizontal, oblique and vertical | horizontal, oblique and vertical |
| Corner chamfer width at 45° | 0.2 mm | 0.2 mm | 0.2 mm |
| Cutter ⌀ D | 10 mm | 10 mm | 10 mm |