{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Revolving centering taper, truncated cone 100/3
Article no.: 323000 100/3
Article code:
Product details
Technical Data
| Morse taper | 3 | |
| smallest ⌀ | 30 mm | |
| Head length L | 100 mm | |
| maximum radial run-out | 0.005 mm | |
| maximum speed | 3,000 min-1 | |
| for workpiece weight at D | 500 kg | |
| for workpiece weight at D1 | 250 kg | |
| Taper angle a | 75 degrees | |
| Type of product | Centring drill |
Identification numbers & Classifications
| Article number | 323000 100/3 | |
| EAN / GTIN | 4045197774743 |
Description
Version:
- Centering taper with truncated cone.
- Particularly sturdy design with oversize bearings.
- The bearings have a special lubricant and require no maintenance.
- The centering taper and tapered arbor are made of high quality material, through hardened and finish ground.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For machining hollow parts, tubes etc. Particularly suitable for heavy machining where at the same time high accuracy is required.