{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Plaquette de fraisage APHT 100302 FR, HU7815
Réf.: 215935 ALU
Référence:
Détails du produit
Caractéristiques techniques
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable | |
| Base form | rhombic | |
| Wide insert B | 6.7 mm | |
| Thickness of the insert S | 3.18 mm | |
| Length of cutting insert L | 10 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 10 mm | |
| Height of cutting edge | 3.49 mm | |
| Corner radius R | 0.2 mm | |
| Corner chamfer length C | 1 mm | |
| Corner chamfer angle | 90 degrees | |
| Corner angle | 85 degrees | |
| Rake angle | 27 degrees | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 15 degrees | |
| Normal clearance angle (flat cutting edge) | 15 degrees | |
| Normal clearance angle, main cutting edge | 11 degrees | |
| Cutting conditions | interrupted | |
| ISO-Code | APHT 100302 FR | |
| Tool material | Carbide | |
| Machining group, manufacturer-specific | HOG | |
| Machining group | N (non-ferrous metals) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | HU7815 | |
| Coating | uncoated | |
| Grade | HU7815 | |
| Insert thickness T | 3.18 mm | |
| Type of fastening for insert | T (with hole attached tangentially via hole) | |
| Interface coding for insert | AP1003023R | |
| Interface coding for insert according to ISO TS 13399-60 | AP1003023R | |
| Insert designation | APHT 100302 FR | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | Aluminium; non-ferrous materials (N) | |
| Tolerance Class | G | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 2 pcs. | |
| Weight | 2 g | |
| Content | 10 pcs. | |
| Correction factor fz | 2.5 |
Identification et classification
| Référence article | 215935 ALU | |
| EAN / GTIN | 4045197765482 | |
| Réf. fabricant | 215935 ALU | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Tableau d’application
N
700
N
600
N
400
N
500
N
400
