Hoffmann Group Home
  • 500.000 listed articles
  • Delivery in 48h
  • TÜV certified quality of delivery
      • Menu
      Item no.: 179700

      Carbide-tipped circular saw blade Rake angle negative

      Brand: GARANT
      Tool material Carbide
      No price available

      Carbide-tipped circular saw blade Rake angle negative

      In stock

      Description

      Version:

      High performance toothing with high teeth and lower finishing teeth. The trapezoidal carbide tips cut easily and generate clean cut surfaces.

      Advantage:

      Particularly suitable for hard anodised profile material.

      Application:

      On high-speed machines.
      F = fine tooth pitch for thin walled profiles or plates up to 5 mm thickness.
      M = medium tooth pitch for profiles and pipes with greater than 5 mm thickness.
      G = coarse tooth pitch for solid material such as bars and rods.
      Negative rake angle 6° for use on machines with oscillating saw blade infeed from above. Advantageous for thin profiles.

      Note:

      • Recommended cutting speed: 40 − 80 m/s, for harder materials such as alloys, brass, bronze it is preferable to use the lowest recommended speed.
      • Pay special attention to maintaining an even feed rate; this prevents damage.
      • Size 400×. . . − When ordering please be sure to indicate: bore dia. (if other than 30 mm), and if necessary the number, and pitch circle diameter of the drive holes (ML).
        Example: 1×400×40 M − 2 ML 12/64.
        Further circular saw blades can be found in Group 58.

      Technical Data

      Tool material
      Carbide 

      Application Table

      Aluminium (short chipping)
      N
      850
      Alu > 10% Si
      N
      650
      CuZn
      N
      450
      wet minimum
       
      dry
       
      Air