{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
SUMOCHAM drilling head ICM k7, IC908, ⌀ DC: 6mm
Article no.: 231750 6
Copy
Article code:
Copy
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
154° point angle / 140° cutter angle
- Tool material: Carbide
- Point angle: 154
Product details
Technical Data
| Series | SUMOCHAM | |
| ⌀ D | 6 mm | |
| Type | IC908 | |
| Tool material | Carbide | |
| Point angle | 154 degrees | |
| for base body size | 6 | |
| Feed f in stainless steel > 900 N/mm2 | 0.09 mm/rev. | |
| Feed f in Inconel® | 0.06 mm/rev. | |
| Iscar item designation | ICM 060 IC908 | |
| Number of changes/inserts | 2 | |
| Coating | TiAlN | |
| Geometry | ICM | |
| Manufacturer's designation | ICM 060 IC908 | |
| Type of product | Drilling head for boring |
Identification & Classification
| Article number |
231750 6
Copy |
|
| EAN / GTIN |
7291075245820
Copy |
|
| Manufacturer number |
5566709
Copy |
Application Table
suitable for / [m/min]
N
ISO code:
155
suitable for / [m/min]
N
ISO code:
120
suitable for / [m/min]
P
ISO code:
100
suitable for / [m/min]
P
ISO code:
90
suitable for / [m/min]
P
ISO code:
100
suitable for / [m/min]
P
ISO code:
70
suitable for / [m/min]
P
ISO code:
55
suitable for / [m/min]
H
ISO code:
70
suitable for / [m/min]
H
ISO code:
60
suitable for / [m/min]
M
ISO code:
50
suitable for / [m/min]
M
ISO code:
50
suitable for / [m/min]
S
ISO code:
35
suitable for / [m/min]
S
ISO code:
35
suitable for / [m/min]
K
ISO code:
120
suitable for / [m/min]
N
ISO code:
155
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Vee ground drilling head for precise positioning and stable seating. Angled, radial stop surfaces for a significant increase in clamping force due to the cutting forces acting during machining. For productive drilling with high feed rates.
ICM
Main area of application ISO M, ISO S (especially Inconel and titanium) as well as ISO N. Cutting edge with negative chamfer and special rounding – especially for stainless steel machining.
ICM
Main area of application ISO M, ISO S (especially Inconel and titanium) as well as ISO N. Cutting edge with negative chamfer and special rounding – especially for stainless steel machining.
Note:
Cutting data applies for the base body 5×D. Drill pilot holes exclusively with drilling head of the same type – in particular for drilling heads FCP and QCP-2M. Please observe the application instructions for the base body. Cutting tolerance of the inserts: k7 (positive toleranced cutting edge diameter).
Designation convention: [type] [⌀ DC]-[addition] [cutting material]
Examples:
No. 231740 6.5 ICP 065 IC908
No. 231742 18.5 ICP 185-2M IC908
No. 231745 18.5 HCP 185-IQ IC908
Designation convention: [type] [⌀ DC]-[addition] [cutting material]
Examples:
No. 231740 6.5 ICP 065 IC908
No. 231742 18.5 ICP 185-2M IC908
No. 231745 18.5 HCP 185-IQ IC908
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.