{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Roughing end mill, uncoated, ⌀ k12 DC: 30mm
Article no.: 192970 30
Article code:
- Tool material: HSS Co 8
- Milling profile: NR
- Tolerance nominal ⌀: k12
- No. of teeth Z: 5
- Helix angle: 30
Product details
Technical Data
| Cutting edge ⌀ DC | 30 mm | |
| Coating | uncoated | |
| Tool material | HSS Co 8 | |
| Milling profile | NR | |
| Tolerance nominal ⌀ | k12 | |
| No. of teeth Z | 5 | |
| Helix angle | 30 degrees | |
| Direction of infeed | horizontal and oblique | |
| Shank | DIN 1835 B to h6 | |
| Through-coolant | no | |
| Flute length Lc | 30 mm | |
| Overall length L | 90 mm | |
| Shank ⌀ Ds | 20 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 750 N/mm2 | 0.055 mm | |
| Colour ring | without | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 192970 30 | |
| EAN / GTIN | 4045197109095 | |
| Manufacturer number | 192970 30 |
Application Table
N
83
P
28
P
23
P
23
P
12
K
23
N
55
Description
Version:
Relief ground knuckle form profile.
End face recessed. Wide lands permit frequent regrinding without losing the profile.
End face recessed. Wide lands permit frequent regrinding without losing the profile.
Advantage:
For roughing at low cutting depths (predominantly face milling).
Very reliable, due to lower load on the machine spindle.
Very reliable, due to lower load on the machine spindle.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
Roughing end mill, uncoated, ⌀ k12 DC: 30mm
on request
In stock
5 pieces in stock
BGN 474.57
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
86 pieces in stock
BGN 358.75
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
29 pieces in stock
BGN 321.63
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
11 pieces in stock
BGN 241.80
plus VAT at the current rate
Prices plus delivery costs
|
|
| Coating | uncoated | uncoated | uncoated | uncoated |
| Corner chamfer angle | 90 degrees | 90 degrees | 90 degrees | 45 degrees |
| Overall length L | 90 mm | 166 mm | 121 mm | 121 mm |
| Flute length Lc | 30 mm | 90 mm | 45 mm | 45 mm |
| Tolerance nominal ⌀ | k12 | k10 | k12 | k12 |
| Direction of infeed | horizontal and oblique | horizontal and oblique | horizontal and oblique | horizontal and oblique |
| Type of product | End / face mill | End / face mill | End / face mill | End / face mill |