Hoffmann Group Home
  • 500.000 listed articles
  • Delivery in 48h
  • TÜV certified quality of delivery
      • Menu
      Article no.: 575032

      Disc brush, ceramic grit (CER) ⌀ 100 mm

      Brand: GARANT
      Grinding medium code Ceramic
      No price available

      Disc brush, ceramic grit (CER) ⌀ 100 mm

      In stock (22 Pieces)



      With longitudinal groove for clamping on face mill arbors (DIN 6357) and combination milling spigot arbors (DIN 6358).
      Disc brushes with extremely tightly packed abrasive bristles (right to the edge of the brush) embedded in the plastic pad. The bristles support each other, giving a highly stable shape. Very long working life.
      Nylon bristles with ceramic grit content. More aggressive abrasive effect.


      • Workpiece rework directly after the machining process.
      • Reproducible results due to constantly exposed grinding grit.
      • Good process reliability thanks to high shape stability and shape accuracy.
      • Quick and secure installation without further accessories.
      • Very low radial run-out.


      On CNC machining centres and when used by robots, preferably wet grinding with cooling lubricant. Machining of flat components: precise deburring, edge rounding, finish machining after milling, surface finishing e.g. of sealing and mating faces.


      Special versions available on request.

      Technical Data

      Working area ⌀
      100 mm
      maximum speed
      3500 min-1
      Bore ⌀
      22 with groove mm
      Bristle height
      35 mm
      Grinding medium code
      Brush ⌀
      100 mm
      Grinding media
      Ceramic grit (CER) 
      Bristle length
      35 mm
      Backing pad ⌀
      106 mm

      Application Table

      Steel < 900 N/mm²
      Steel < 1400 N/mm²
      Steel < 55 HRC
      Steel < 60 HRC
      wet maximum