Article no.: 202251 20

Solid carbide milling cutter HPC 20 mm

    • No price available
on request
In stock
29 pieces in stock
Brand: GARANT
Tool material: Solid carbide
Standard: Manufacturer’s standard
Type: W
Tolerance nominal ⌀: f8
No. of teeth Z: 3
Helix angle: 45 °
Helix angle characteristic: unequal spacing
Spacing of the cutters: unequal spacing
Direction of infeed: horizontal, oblique and vertical
Cutting width a<sub>e</sub> for milling operation: Full slot cutting depth 1×D
Cutting width a<sub>e</sub> for milling operation: 0.3×D for side milling
Shank: DIN 6535 HB to h6
Balance quality with shank: G 2.5 with HB
Machining strategy: HPC

Information

  • Tool material: Solid carbide
  • Standard: Manufacturer’s standard
  • Type: W
  • Tolerance nominal ⌀: f8
  • No. of teeth Z: 3

Technical Data

Cutting edge ⌀ DC 20 mm
Coating ZOX
Tool material Solid carbide
Standard Manufacturer’s standard
Type W
Tolerance nominal ⌀ f8
No. of teeth Z 3
Helix angle 45 °
Helix angle characteristic unequal spacing
Spacing of the cutters unequal spacing
Direction of infeed horizontal, oblique and vertical
Cutting width ae for milling operation Full slot cutting depth 1×D; 0.3×D for side milling
Shank DIN 6535 HB to h6
Balance quality with shank G 2.5 with HB
Through-coolant no
Machining strategy HPC
Flute length Lc 32 mm
Overhang length L1 incl. recess 98 mm
Recess ⌀ D1 19 mm
Overall length L 150 mm
Shank ⌀ Ds 20 mm
Shank form HB
Corner chamfer width at 45° 0.2 mm
Corner chamfer angle 45 °
Feed fz for slot milling in short-chipping aluminium 0.12 mm
Feed fz for side milling in short-chipping aluminium 0.16 mm
Colour ring yellow
Type of product End / face mill
Article number 202251 20
EAN / GTIN 4045197538628

Description

Version:

Sturdy roughing end mill without knuckle profile.
With strong core, special chip breaker recesses and large polished flutes.

Application:

For roughing milling with high demands on the component surface.

Note:

NEW GENERATION AVAILABLE!
Recommended successor product is No. 202017.

Application Table

Aluminium
N
250
Aluminium (short chipping)
N
240
Alu > 10% Si
N
120
CuZn
N
120
wet maximum
 
wet minimum
 
dry
 
Air
 

Create new article code

Change article code

By means of article codes you can record your internal item numbers in the eShop.

Share this product

or copy this link

Add to shopping list

Select article variation and quantity

⌀ f8 DC (mm) Unit price incl. VAT
To shopping cart