{{ name }}
Art-nr {{ combinedCodeWithHighlight }}
Artikelnummer:
EAN/GTIN:
Tillverkarens nummer:
- Dragtapp norm: MAS 403
Produktdetaljer
Tekniska data
| passar för konor | 50 | |
| Hålegenskap | med hål | |
| Dragtapp norm | MAS 403 | |
| Kragdiameter D | 38 mm | |
| Huvud-⌀ D1 | 23 mm | |
| totallängd L | 85 mm | |
| L1 | 45 mm | |
| gängaM | M24 | |
| max. åtdragningsmoment | 150 Nm | |
| passar för konor med färgkod | SK 50 | |
| nyckelvidd | 30 mm | |
| Produktslag | Dragtappar |
Identifieringsnummer och klassificeringar
| Artikelnummer | 308785 50 | |
| EAN/GTIN | 4045197543103 |
Benämning
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
For tools with taper shanks see also JIS B 6339 (MAS-BT) / ISO 7388-2.
Note:
Sealed − with O-ring.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.
Look in the eShop – you will find the right clamping wrench and width for every job.
When installing the pull stud, cheque the correct tightening torque.