{{ name }}
Cod articol {{ combinedCodeWithHighlight }}
Codul articolului:
EAN / GTIN:
Număr producător:
GARANT Diabolo Freză pentru copiere cu cap sferic, din carbură 3X12 mm
Cod articol: 207373 3X12
Codul articolului:
- Materialul sculei: Carbură monobloc
- Standard: Normă de fabricaţie
- Tip: H
- Toleranţă ⌀ nominal: 0 / -0,005
- No. of teeth Z: 2
Detalii despre produs
Date tehnice
| Serie | Diabolo | |
| Cutting edge ⌀ DC | 3 mm | |
| Strat de acoperire | TiAlN | |
| Materialul sculei | Carbură monobloc | |
| Standard | Normă de fabricaţie | |
| Tip | H | |
| Toleranţă ⌀ nominal | 0 / -0,005 | |
| No. of teeth Z | 2 | |
| Helix angle | 30 degrees | |
| Direcţia de aşchiere | Orizontal, înclinat şi vertical | |
| Lăţime de atac ae la operaţia de frezare | 0,05×D la frezare prin copiere | |
| Coadă tip | DIN 6535 HB cu h5 | |
| Răcire interioară | nu | |
| Flute length Lc | 3.5 mm | |
| Corner radius R1 | 1.5 mm | |
| Overhang length L1 incl. recess | 12 mm | |
| Recess ⌀ D1 | 2.92 mm | |
| Overall length L | 45 mm | |
| Shank ⌀ Ds | 4 mm | |
| Feed fz for copy milling in steel < 65 HRC | 0.03 mm | |
| Correction factor ap corr | 1 | |
| Inel colorat | roşu | |
| Tip produs | Freză cu cap sferic |
Numere de identificare și clasificări
| Cod articol | 207373 3X12 | |
| EAN / GTIN | 4045197936936 |
Tabel de aplicaţii
P
200
P
200
P
190
P
170
H
120
H
100
H
72
H
55
H
50
H
45
M
90
M
80
N
140
Descriere
Version:
GARANT Diabolo:
Special geometry, coating and carbide for hard machining in the high-performance field. Suitable even for machining electrolytic copper.
Recess angle α = 16°.
Tolerances:
Special geometry, coating and carbide for hard machining in the high-performance field. Suitable even for machining electrolytic copper.
Recess angle α = 16°.
Tolerances:
- Corner radius: Radius contour = 0 / -0.005 mm.
- Neck ⌀: D1 = 0 / -0.01 mm.
Note:
At greater tool overhang lengths, use a reduced value for ap!
values for:
copying: ap = 0.05×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z
values for:
copying: ap = 0.05×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z