{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
RFID chip tag, Type: TAG25
Article no.: 085672 TAG25
Copy
Article code:
Copy
- Interface: Hoffmann Group Connected
Product details
Technical Data
| Length | 40,2 mm | |
| Width | 20,2 mm | |
| Height | 0,4 mm | |
| Frequency | 13,56 MHz | |
| Number of pieces | 25 | |
| Interface | Hoffmann Group Connected | |
| Series | Hoffmann Group Connected | |
| Type of product | RFID technology |
Identification & Classification
| Article number |
085672 TAG25
Copy |
|
| EAN / GTIN |
2050002044906
Copy |
|
| Manufacturer/responsible person | Neosid Pemetzrieder GmbH & Co. KG, Langenscheid 26-30, 58553 HALVER, Deutschland, www.neosid.de |
Description
Version:
This article is compatible with the Hoffmann Group Connected software solutions.
Advantage:
Hoffmann Group Connected
With this article you are gaining a building block for your digitally networked production. Increased productivity can be achieved together with the respective software module.
With this article you are gaining a building block for your digitally networked production. Increased productivity can be achieved together with the respective software module.
Warning:
Intended use
Reasonably foreseeable misuse
- For communication with RFID readers in the short-wave band.
- When shipped from the factory, the RFID chip contains an ID.
- Further accessories are necessary in order to store further information using the ASCII code.
- No.
- 085762: For mounting on flat surfaces.
- No.
- 085673: For mounting on arbors with a 10.3 mm bore.
- Operate toolholder with RFID chip PLUG up to a maximum speed of 20,000 rpm.
- For use indoors.
- For use at room temperature.
- For both industrial and private use.
- Use only when it is technically in good condition and safe to operate.
Reasonably foreseeable misuse
- Do not use in explosion hazard areas.
- Do not make any unauthorised modifications.
- Not for use where there is exposure to intense heat, direct sunlight, naked flames or liquids.
- Do not subject it to blows, impacts or heavy loads.
- Do not operate outdoors or in rooms with high atmospheric humidity.
- Not for use in areas where high concentrations of dust, flammable gases, vapours or solvents are present.