{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
Diepgatboor HSS-E 4,8 mm
Artikelnummer: 116061 4,8
Klantartikelnummer:
- Snijmateriaal: HSS E
- Norm: DIN 340
- Type: FS
- Tolerantie nominale ⌀: h8
- Tophoek: 130
Productdetails
Technische gegevens
| Nominale ⌀ DC | 4,8 mm | |
| Coating | ongecoat | |
| Snijmateriaal | HSS E | |
| Norm | DIN 340 | |
| Type | FS | |
| Tolerantie nominale ⌀ | h8 | |
| Tophoek | 130 graden | |
| Spiraalhoek | 38 graden | |
| Schacht | Cilinderschacht | |
| Aantal snijkanten Z | 2 | |
| Inwendige koeling | nee | |
| aanbevolen maximale boordiepte L2 | 79,8 mm | |
| Spaangroeflengte Lc | 87 mm | |
| Totale lengte L | 132 mm | |
| Schacht-⌀ Ds | 4,8 mm | |
| Voeding f in staal < 500 N/mm2 | 0,05 mm/omw. | |
| Gekleurde ring | zonder | |
| Producttype | Spiraalboor |
Identificatienummers en classificaties
| Artikelnummer | 116061 4,8 | |
| EAN/GTIN | 4045197026811 |
Toepassingstabel
N
70
N
45
P
28
P
21
P
18
K
25
Omschrijving
Version:
Significantly strengthened core without taper.
Precision ground point.
With specially shaped slots. Designed for deep holes up to 10×D and materials with critical chip formation characteristics.
Precision ground point.
With specially shaped slots. Designed for deep holes up to 10×D and materials with critical chip formation characteristics.
Recommendation:
Maximum drilling depth:
L2 = LC - 1.5 × DC.
L2 = LC - 1.5 × DC.