{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
Centreerboor HSS R 0,5 mm
Artikelnummer: 111350 0,5
Klantartikelnummer:
- Snijmateriaal: HSS
- Norm: DIN 333
- Type: R
- Tolerantie nominale ⌀: k12
- Verzinkhoek met radius: 60
Productdetails
Technische gegevens
| Coating | ongecoat | |
| Snijmateriaal | HSS | |
| Norm | DIN 333 | |
| Type | R | |
| Tolerantie nominale ⌀ | k12 | |
| Verzinkhoek met radius | 60 graden | |
| Snijrichting | rechts | |
| Schacht | Cilinderschacht met h7 | |
| Aantal snijkanten Z | 2 | |
| Inwendige koeling | nee | |
| Nominale ⌀ DC | 0,5 mm | |
| Voor werkstuk-⌀ | < 4 mm | |
| Schacht-⌀ Ds | 3,15 mm | |
| Schachttolerantie | h7 | |
| Totale lengte L | 25 mm | |
| Voeding f in staal < 900 N/mm2 | 0,01 mm/omw. | |
| Gekleurde ring | zonder | |
| Producttype | Centreerboor |
Identificatienummers en classificaties
| Artikelnummer | 111350 0,5 | |
| EAN/GTIN | 4045197000590 |
Toepassingstabel
N
70
N
45
P
40
P
30
P
25
P
10
P
8
N
80
Omschrijving
Version:
Ground from solid and relief ground, spiral fluted.
Centre drill with radius form R:
Centre drill with radius form R:
- The radius curve eliminates the sharp transition from drill point to countersink angle that is present on form A, so the risk of fracture is reduced.
- In the event of angular misalignment of the lathe centre, the ring bearing face avoids the component running only on the external or internal edge of the bearing face. Even if the lathe centres are not in line, good support is provided.
Single-ended.